DEVI devireg 550 Podręcznik Użytkownika Pobierz pdf (Strona 5)

8. The mat should be tested-see page 7.

The mat can now be covered in one of two methods-

Concrete and wooden ﬂ oors using ﬂ exible tile adhesives

Working with a width of devimat at a time, apply

ﬂ exible tile adhesive through the mat with a rubber

back trowel or similar so that the heating cable is

covered, making sure that there are no air pockets.

Another layer of adhesive can then be applied

carefully using a suitable notched trowel to comb

the adhesive before applying the tiles.

Concrete and wooden ﬂ oors using self-levelling compounds

An alternative method is to cover the devimat with a suitable self levelling/

latex type compound. This product will ﬁ nd its own level giving you a ﬂ at

surface to then apply a layer of ﬂ exible tile adhesive using a suitable notched

trowel to comb the adhesive before applying the tiles.

The mat should be tested-see page 7.

Flooring note:

Whichever ﬂ oor covering is being used with the Devimat system, it must be

covered with a latex/adhesive covering before the ﬂ oor ﬁ nish is laid, the

suitability of which should be checked for use with underﬂ oor heating with the

manufacturer. If using Devimat beneath wood laminate ﬂ ooring, you must only

use the thin foam type sound-deadening layer, this must not exceed 3mm.

Installing the Devimat

™

on concrete

ﬂ oors

Ceramic tiles

Devimat

™

Tiling adhesive

Seal all sides and

edges of plywood

T & G ﬂ oor boards

15 mm plywood bracing

screwed at 200 mm centres

with 0.5-1.0 mm gaps

between

Wood joist

Floor sensor

Ceramic tiles

Devimat

™

Tiling adhesive

Existing or new screeded ﬂ oor

Floor sensor

Installing the Devimat

™

timber ﬂ oors

1 2 3 4 5 6 7 8 9 10 11 12

Komentarze do niniejszej Instrukcji

Brak uwag

DEVI devireg 550 Podręcznik Użytkownika Strona 5

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Termostaty DEVI devireg 550