DEVI devireg 550 Podręcznik Użytkownika Pobierz pdf (Strona 4)

5. Before laying the mat should be tested-see page 7.

Remove the plastic outer and place the cold tail of

the mat at the connection point. The Devimat

™

has

a self-adhesive backing, lay this to the ﬂ oor and roll

the mat out, if necessary the mat can be laid with

the cable face down. In situations where the mat

has to be turned over it can be secured using

Devipins, hot glue gun (taking care not to damage

the heating cable), staple gun or double sided tape.

6. When the Devimat

™

reaches

the end of the run, simply

cut the grey mesh (NOT THE

RED CABLE) and turn the mat,

positioning the next piece

beside the ﬁ rst. When cutting

and turning the mat ensure there is a 50mm

gap between the cable loops. To avoid risk

of damage at later stage do not lay the mat

where objects will be put onto or ﬁ xed to the

ﬂ oor.

7. If required, the cable can be removed from

the mesh and loops formed manually, but ensure

the cables are spaced the same distance as those

on the mat.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

DEVI devireg 550 Podręcznik Użytkownika Strona 4